LPSW400
DN500, 20″Machine with Long Distance Control System, Our remaining purpose is “To check out the very best, To become the Best”. Make sure you come to feel free to call with us for those who have any necessities.
សម្ភារៈនៃបំពង់ខាងក្រៅChina Water Filling Machine, Machine៣.២.១ ប្រភេទតភ្ជាប់បាយ៉ូណែតសុញ្ញកាសជាមួយក្លីប
ម៉ូដែល
ការតភ្ជាប់
ប្រភេទ
អង្កត់ផ្ចិតបន្ទាប់បន្សំនៃបំពង់ខាងក្នុង
សម្ពាធរចនា
សម្ភារៈ
នៃបំពង់ខាងក្នុង
ស្តង់ដារ
| Vកំណត់សម្គាល់ | ដែកអ៊ីណុកស៊េរី ៣០០ |
| |
| DN15, 1/2″ | DN10, 3/8″ | ៨ បារ | បានណែនាំ ≤ DN25 ឬ 1″។ ឬជ្រើសរើសប្រភេទការតភ្ជាប់បាយ៉ូណែតសុញ្ញកាសជាមួយគែម និងប៊ូឡុង (ពី DN10, 3/8″ ដល់ DN80, 3″) ប្រភេទការតភ្ជាប់ផ្សារ VIP (ពី DN10, 3/8″ ដល់ DN500, 20″) |
| ASME B31.3 | ខ គឺ 304L, | ||
| C គឺ 316, | No | No | D គឺ 316L, |
| Nominal Diameter of Inner Pipe | HLPD | B01508 | DN15, 1/2″ |
| Design Pressure | B02008 | DN20, 3/4″ | HLPD |
| B02508 | អង្កត់ផ្ចិតបន្ទាប់បន្សំនៃបំពង់ខាងក្នុង៖ | អង្កត់ផ្ចិតបន្ទាប់បន្សំនៃបំពង់ខាងក្នុង៖ | បានណែនាំ ≤ DN25 ឬ 1″។ ឬជ្រើសរើសប្រភេទការតភ្ជាប់បាយ៉ូណែតសុញ្ញកាសជាមួយគែម និងប៊ូឡុង (ពី DN10, 3/8″ ដល់ DN80, 3″) ប្រភេទការតភ្ជាប់ផ្សារ VIP (ពី DN10, 3/8″ ដល់ DN500, 20″) |
| អង្កត់ផ្ចិតបន្ទាប់បន្សំនៃបំពង់ខាងក្រៅ៖ | ត្រូវបានណែនាំដោយស្តង់ដារសហគ្រាសនៃឧបករណ៍ HL Cryogenic។ វាក៏អាចផលិតបានតាមតម្រូវការរបស់អតិថិជនផងដែរ។ | ||
| សម្ពាធរចនា៖ | បានណែនាំ ≤ 8 បារ។ ឬជ្រើសរើសប្រភេទការតភ្ជាប់បាយ៉ូណែតសុញ្ញកាសជាមួយគែម និងប៊ូឡុង (≤16 បារ) ប្រភេទការតភ្ជាប់ដែលផ្សារ (≤64 បារ) | ||
| Material | អ៊ូឌូរ | ||
| ស្ថានភាពថាមពល៖ | LN2ការដ្ឋានត្រូវផ្គត់ផ្គង់ថាមពលដល់ម៉ាស៊ីនបូមធូលី និងជូនដំណឹងដល់ HL Cryogenic Equipment អំពីព័ត៌មានអគ្គិសនីក្នុងស្រុក (វ៉ុល និងហឺត)។2៣.២.២ ប្រភេទតភ្ជាប់បាយ៉ូណែតសុញ្ញកាសជាមួយគែម និងប៊ូឡុង | ||
ម៉ូដែល
ការតភ្ជាប់
ប្រភេទ
អង្កត់ផ្ចិតបន្ទាប់បន្សំនៃបំពង់ខាងក្នុង
| សម្ពាធរចនា | សម្ភារៈ | |
| នៃបំពង់ខាងក្នុង | ស្តង់ដារ | កំណត់សម្គាល់ |
| សេវាសង្គ្រោះបឋម | DF010 | ០០X |
| ប្រភេទការតភ្ជាប់បាយ៉ូណែតសុញ្ញកាសជាមួយគែម និងប៊ូឡុងសម្រាប់ប្រព័ន្ធបំពង់អ៊ីសូឡង់សុញ្ញកាសឋិតិវន្ត | សម្ភារៈនៃបំពង់ខាងក្នុង។ | សម្ភារៈនៃបំពង់ខាងក្នុង។ |
| ដែកអ៊ីណុកស៊េរី ៣០០ | សម្ភារៈនៃបំពង់ខាងក្នុង។ | សម្ភារៈនៃបំពង់ខាងក្នុង។ |
| សម្ភារៈនៃបំពង់ខាងក្នុង។ | សម្ភារៈនៃបំពង់ខាងក្នុង។ |
ក គឺ ៣០៤,
ខ គឺ 304L,
C គឺ 316,
D គឺ 316L,
អ៊ី គឺជាផ្សេងទៀត។
HLPD
F015
០០X
DN15, 1/2″
HLPD
F020
០០X
Nominal Diameter of Inner Pipe
HLPD
DN25, 1 អ៊ីញ
០០X
DN25, 1 អ៊ីញ
HLPD
Design Pressure
០០X
DN32, 1-1/4″
HLPD
F040
០០X
DN40, 1-1/2″
HLPD
F050
០០X
DN50, 2 អ៊ីញ
HLPD
F065
០០X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +៨៦ ១៨០៩០១១១៦៤៣បានណែនាំ ≤ 16 បារ។ ឬជ្រើសរើសប្រភេទការតភ្ជាប់ដែលផ្សារ (≤64 បារ)។X | ភាសាហេព្រើរ | DN10, 3/8″ | ហុងគ្រី
| អ៊ូឌូរ | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +៨៦ ១៨០៩០១១១៦៤៣ឡាតវីX | DN15, 1/2″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣ម៉ាសេដូនX | DN20, 3/4″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣ម៉ាឡាយ៉ាឡាមX | DN25, 1″ |
Nominal Diameter of Inner Pipe:ម៉ារ៉ាធី
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ន័រវេស
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
ខ គឺ 304L,
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +៨៦ ១៨០៩០១១១៦៤៣DN20, 3/4″00X | ភាសាតេលូហ្គូ | DN10, 3/8″ | អ៊ុយក្រែន | អ៊ូឌូរ | ASME B31.3 | 00: ០០X 08 is 8bar, ហូសា
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +៨៦ ១៨០៩០១១១៦៤៣អ៊ុយហ្គឺរ00X | DN15, 1/2″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣F02000X | DN20, 3/4″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣F02500X | DN25, 1″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣F03200X | DN32, 1-1/4″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣F04000X | DN40, 1-1/2″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣F05000X | DN50, 2″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣F06500X | DN65, 2-1/2″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣F08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN500, 20″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: DN500, 20″
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
សម្ភារៈនៃបំពង់ខាងក្រៅ
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +៨៦ ១៨០៩០១១១៦៤៣បន្ទាប់៖00X | ម៉ាស៊ីនបំពេញទឹកចិន | DN10, 3/8″ | 8~64 bar | អ៊ូឌូរ | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40, 64.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +៨៦ ១៨០៩០១១១៦៤៣ទំនាក់ទំនងមកយើងខ្ញុំ00X | DN15, 1/2″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣ស៊េរីបំពង់ដែលមានអ៊ីសូឡង់សុញ្ញកាស00X | DN20, 3/4″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣ស៊េរីឧបករណ៍បំបែកដំណាក់កាលដែលមានអ៊ីសូឡង់សុញ្ញកាស00X | DN25, 1″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣W03200X | DN32, 1-1/4″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣W04000X | DN40, 1-1/2″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣W05000X | DN50, 2″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣W06500X | DN65, 2-1/2″ | |||||
| +៨៦ ១៨០៩០១១១៦៤៣W08000X | DN80, 3″ | |||||
| Hភាសាបារាំង00X | DN100, 4″ | |||||
| Hអេស្ប៉ាញ00X | DN125, 5″ | |||||
| Hកូរ៉េ00X | DN150, 6″ | |||||
| Hក្រិក00X | DN200, 8″ | |||||
| Hភាសាដាណឺម៉ាក00X | DN250, 10″ | |||||
| Hឆែក00X | DN300, 12″ | |||||
| Hប៉ូឡូញ00X | DN350, 14″ | |||||
| Hភាសាអេស្ពេរ៉ាន់តូ00X | DN400, 16″ | |||||
| Hអាល់បានី00X | DN450, 18″ | |||||
| Hអាស៊ែបៃហ្សង់00X | DN500, 20″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
កូស៊ីកាន
ភាសាក្រូអាត
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPហាវ៉ៃX | ភាសាហេព្រើរ | DN10, 3/8″ | ហុងគ្រី | អ៊ូឌូរ | ASME B31.3 | X:ជ្វា B is 304L, C is 316, D is 316L, E is other. |
| HLPDឡាតវីX | DN15, 1/2″ | |||||
| HLPDម៉ាសេដូនX | DN20, 3/4″ | |||||
| HLPDម៉ាឡាយ៉ាឡាមX | DN25, 1″ |
Nominal Diameter of Inner Pipe:ម៉ារ៉ាធី
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ន័រវេស
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)
សេសូតូ
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPតាជីគី00X | ភាសាតេលូហ្គូ | DN10, 3/8″ | អ៊ុយក្រែន | អ៊ូឌូរ | ASME B31.3 | 00: វៀតណាម ហូសា
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLPDអ៊ុយហ្គឺរ00X | DN15, 1/2″ | |||||
| HLPDF02000X | DN20, 3/4″ | |||||
| HLPDF02500X | DN25, 1″ | |||||
| HLPDF03200X | DN32, 1-1/4″ | |||||
| HLPDF04000X | DN40, 1-1/2″ | |||||
| HLPDF05000X | DN50, 2″ | |||||
| HLPDF06500X | DN65, 2-1/2″ | |||||
| HLPDF08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN500, 20″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤64 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)
3.2.3 Welded Connection Type
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Piping System | DN10, 3/8″ | 8~64 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00:Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40, 64. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLPDW01500X | DN15, 1/2″ | |||||
| HLPDW02000X | DN20, 3/4″ | |||||
| HLPDW02500X | DN25, 1″ | |||||
| HLPDW03200X | DN32, 1-1/4″ | |||||
| HLPDW04000X | DN40, 1-1/2″ | |||||
| HLPDW05000X | DN50, 2″ | |||||
| HLPDW06500X | DN65, 2-1/2″ | |||||
| HLPDW08000X | DN80, 3″ | |||||
| HLPDW10000X | DN100, 4″ | |||||
| HLPDW12500X | DN125, 5″ | |||||
| HLPDW15000X | DN150, 6″ | |||||
| HLPDW20000X | DN200, 8″ | |||||
| HLPDW25000X | DN250, 10″ | |||||
| HLPDW30000X | DN300, 12″ | |||||
| HLPDW35000X | DN350, 14″ | |||||
| HLPDW40000X | DN400, 16″ | |||||
| HLPDW45000X | DN450, 18″ | |||||
| HLPDW50000X | DN500, 20″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)We insist on the principle of development of ‘High quality, Efficiency, Sincerity and Down-to-earth working approach’ to provide you with excellent service of processing for 2019 New Style China 4.8kw Electric Beer Juice Nitrogen Tin Can Filling Sealing Line Machine with Long Distance Control System, Our remaining purpose is “To check out the very best, To become the Best”. Make sure you come to feel free to call with us for those who have any necessities.
2019 New Style China Water Filling Machine, Machine, We have been proud to supply our goods to every auto fan all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
